The college did not have a fully functioning stage lift system so they put out for bid a replacement to an antiquated system without having to change out the entire pit lift.
Working with our ViaController and our system integration, we were able to put in an updated motor control cabinet and a wall mounted control panel that will easily allow the trained staff to operate this original system with a push of a button.
iWeiss has completed another Airplane Rigging project with Century Aviation of East Wenatchee WA.
Project Manager Russ Dusek worked with Century Aviation owner Mark Smith on the planning and engineering for the rigging of restored Sikorsky HRS-2 and UH-34D helicopters, along with a WW II SBD Dauntless hung – overhead in a dive attitude -for the expansion of the National Marine Corps Museum in Virginia.
For the Dauntless the factory installed lift points were designed for hoisting the aircraft onto a ship so the challenge here was to engineer new points to support the dive attitude required by the museum. Working with Mike Rolfs of Pacific Engineering, Russ & Mark designed and fabricated new attachment points that would provide the necessary strength for a “dive hang” without compromising the integrity or appearance of the 6,000 lb. aircraft -guts removed. As the plane had to be flown over an existing floor exhibit, once engineered load tests were performed we employed chain hoists to lift and laterally move the plane and place it into the desired bank and attitude. Once approved, permanent rigging cables were installed and the hoists removed.
The 8,000lb UH-34D Helicopter was mounted in a 9 degree nose down position on steel stands built by Century. As overhead lifting was not possible due to a Jet display, we employed a 12,000 lb capacity tele-handler to lift the copter from its main rotor head with a second lift at the tail wheel to achieve final attitude on the stands.
iWeiss continues its relationship with Century Aviation later this year with the installation of an F/A-18A Hornet in a newly constructed section of the museum.
“Massive” black and white velour drapery surround Brooklyn’s music venue, National Sawdust, creating an “acoustic envelope”. We built and installed a line-shaft for lighting positions and all of the drapery is hanging on iWeiss curtain track and attached by custom brackets into the solid concrete shell.
iWeiss recently completed a renovation at Marist College in the Music Building and Student Center Renovations.
The Nelly Goletti Theatre received all new Drapery, including a New House Curtain and Valance with a Full Stage Set of IFR Velour Masking. The new Choir, Symphony and Ensemble Rooms all required acoustic treatments that both provided function and blended well into the architecture.
In the Choir Room we installed twelve AcoustaCorp Acouroll Banners. The Symphony Room required floor to ceiling drapery to mask the large picture windows. To accomplish this we installed four iWeiss ViaTravelers with an iWeiss control station along with Custom Fabricated IFR Drapery to complete the acoustic properties. Ensemble room was outfitted with curtain tracks and IFR Drapery.
With beautiful architecture, our drapery, and all of the equipment, Marist College now has a fully functioning Music Building and Student Center.
An Austrian Curtain is fabricated as one piece and consists of multiple rows of scallops or swag. It is shirred along the top to provide a certain amount of horizontal fullness which determines the depth of each scallop. The scallops in turn can be created by shirring the fabric vertically along each row. Shirring provides small tight scallops. This combinations of vertical and horizontal fullness creates a very rich and dramatic effect.
An Austrian is typically rigged fly out in one piece or it may to gather up by means of cable running through rings sewn vertically to the back of the curtain along a predetermined number of lift lines. This is useful when there is no fly space.
Our ViaWinch is a prefect example of a automation solutions for an Austrian Curtain. You can incorporate a Standard (10) Lift Line Clew and easily operate a beautiful Austrian in your space.
The possibilities are endless when it comes to materials used for an Austrian Curtain. We have made them out of standard Velour, sheers, and satins, but have also made them out of RIBBONS and SILICON TUBING!